Page 1 of 1

Pocket Mini Pc M6 Pentium N6005

Posted: 2025-05-24
by Petrus-CCCAC
hello,

here i show my results with the N6005 pocket pc. I evaluate the power consumption taking into account the CPU configurations.

specs:
celeron n6005, 16 gb ram (single channel - no upgrade possible), 265 gb nvme 3gb read and 1,3 gb write
product side: https://www.fruugo.de/pocket-mini-pc-m6 ... anguage=de
web archive side: http://web.archive.org/web/202505241309 ... anguage=de
product side: https://www.alibaba.com/product-detail/ ... 91691.html
web archive side: http://web.archive.org/web/202505241334 ... 91691.html

Test environment:

Kubuntu 24.04 64-bit
Benchmark: Geekbench 6
CPU modification tool: cpu-power-gui
Fan runs continuously at 100%

-------------------------------------------------------

CUSTOM profile: (800 mhz - 3300 mhz):
https://browser.geekbench.com/v6/cpu/12113718
https://web.archive.org/web/20250524133 ... u/12113718

single core benchmark: 15-17 watt max
multi core benchmark: 18 - 20 watt max
Temp max: 72 Grad
benchmark time and consumption: 13 Minuten 3 Watt
-------------------------------------------------------

2000MHZ- profile:
https://browser.geekbench.com/v6/cpu/12114025
https://web.archive.org/web/20250524133 ... u/12114025

single core benchmark: 10 - 11 watt
multi core benchmark: 14 - 15 watt
Temp max: 57 Grad
benchmark time and consumption: 17:30 min/sek 3 Watt
-------------------------------------------------------

800MHZ-profile:
https://browser.geekbench.com/v6/cpu/12114969
https://web.archive.org/web/20250524133 ... u/12114969

single core benchmark: 9 - 10 watt
multi core benchmark: 10,5 - 12 watt
Temp max: 44 Grad
benchmark time and consumption: 38:30 Minuten/sekunden 6 Watt
-------------------------------------------------------

gpu frequence control:

show the live frequence with LACT (OC -> show histortical chart)

control the frequence with this commands: (after reboot the values are custom again)
echo 200 | sudo tee /sys/class/drm/card1/gt_max_freq_mhz
echo 200 | sudo tee /sys/class/drm/card1/gt_boost_freq_mhz
alternative command: cpupower frequency-set

power custom by gpu stress test glmark2 : 20,5 watt
power 200mhz by gpu stress test glmark2 : 16,5 watt
-------------------------------------------------------
The combination of CPU max 800 MHz and GPU max 200 MHz results in a maximum consumption of 12 watts.

https://browser.geekbench.com/v6/cpu/12119694
http://web.archive.org/web/202505241825 ... u/12119694

Temp max: 41 Grad

1080p 60fps YouTube playback works.
This puts us on par with a Raspberry Pi 5 in terms of power consumption.